Aeroponics HighPressure Booster Pump Aquatec CDP5853 Transformer

Aquatec 5853 Booster Pump + Transformer MADE IN U.S.A.

Aquatec pump #  5853-2LM2-B534   (custom made pump for aeroponics and misting and 300GPD RO systems)

Our internal part # AQ8855-TRM-115V 

For Aeroponics high pressure applications

For Misting applications

For 200GPD to 380GPD RO systems

The setup will include:

• Pump:                   Aquatec 5853 pump to boost input water pressure up to 130 psi.  (Actual boost pressure depends on your RO system production rate and drain rate. For aeroponics or misting applications the boost pressure depends on total output flow rate of nozzles.) Normal operating pressure 80-100 psi. 
• Inlet/Outlet:           3/8" quick connect, for 3/8" O.D. tubing
• Transformer:        Heavy duty transformer, 115VAC to 24VAC, 2.5 Amp, plug in to regular 110V electrical outlet, USA plug.
• Instruction sheet
• Two of 3/8 to 1/4 reducer fitting:  In case you want to connect 1/4" OD tubing. The fittings came in a small baggie and can sometimes to mixed in with package fillers. Please be sure to check entire package contents.

NOTE:  This pump assembly is an intermittent duty, not a continuous duty.  If you need to run the pump more than 4 hours non-stop, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and transformer, or you can put a fan to blow air into the pump assembly to cool it down.

SPECIAL NOTE FOR AEROPONICS APPLICATIONS:

1. You can use a timer to control the pump, when to turn on/off  and the time interval it stays on.
2. Since this pump is very powerful and high flow, for small aeroponic system, you don't need a output pressure tank or pressure switch.
3. For larger aeroponic system, you can add a pressure tank, a pressure switch to the output side,  we do carry special tanks and high pressure switch as well.

Aquatec Boost Pump

CDP 8800 series pump flow rate comparison chart:

Model 8851 -  at open flow, flow rate is 2.10 Liter per minute, at 80 psi, 1.2 L/min. , boost up to 80 psi

Model 8852 - at open flow, flow rate is 2.60 Liter per minute,  at 80 psi, 1.4 L/min., boost up to 80 psi

Model 5853 - at open flow, flow rate is 3.8 Liter per minute,  at 80 psi, 2.0 L/min. ,  boost up to 130 psi

Specifications:

*Important Note:  8855 is FilterDirect internal part number which is different from Aquatec part number.  There will be an overlay sticker #8855 affixed onto the pump and this is not against Aquatec policy.   FilterDirect is an authorized distributor of Aquatec.  If you have any doubt about our products and services please do not make a purchase.