FM-8100TG44, DigiFlow Digital Water Flow Rate Meter

Digital Flow Monitor  (Counting Down, Alert)   Made by Digiflow USA

• Counting down: set a volume in gallons then it starts counting down when water passing through it.  It will beep at the end of countdown. Counting down from: min 100 gal; max 19900 gal.

• Elapse time: counting down, counting down from: min. setting 30 days,  max setting 720 days.

• Real time Flow rate:  0.4 to 6.6 GPM (gallons per minute) 
  ** Minimum flow rate 0.4 GPM

Model: 8100T-G-44 (gallon model)  

• Flow totalizing up to 2600 gallons or 9999 Liters
• Flow rate measuring range: 0.4 to 6.6 GPM (gallons per minute)
• Connection:  1/2” BSP + 1/2 BSP to 1/2 quick connect for 1/2 OD tubing
• Optional: if you need 1/2 MPT convertor, it will be $7 extra for a set of two. Please send request and we will bill you.
• Electrical:  3 DC Volt (two AA battery)   1.0mA (display mode) 0.015mA (idle)
• Low battery power alert
• Automatic data saving when battery is out
• Reset button:  press and hold the button for 5 sec. to reset to zero

Material:

• Sensor body: Acetal copolymer, TICONA M90
• Turbine:  Acetal Copolymer
• Turbine shaft: #304 stainless steel
• O-ring:  EPDM Rubber
• Housing:  ABS resin

Specification:

• Dimension: (display) 2 3/4" x 2 1/4" x 1 3/8”
• Operating temperature: 40F to 172F  or 4 C to 80 C
• Max operating pressure: 85 psi or 6 bar
• Accuracy: +/- 10%